Conventional breaker core assemblies have a 3/8" center dividing plate, which serves as a break point to saw cut or break with a hammer, to make two usable half units. Feeding the ties on each side of the 3/8" divider has always been a concern for producers. "Spotlight" block eliminates the center divider on the core assembly making it easier to fill the mold. "Spotlight" block can be saw-cut into two usable half units or can be broken with a hammer to make one usable half unit.

Standard widths can be produced in inch or metric. A set of parts for one compartment consists of the following: (1) core assembly, (2) stripper shoes and (1) plunger.

Contact Dave Brilinski, mold sales manager, for more information at (989) 354-1017 or e-mail dbrilinski@besser.com.